Ошибка SMART Установщик бета-версии MacOS 11 Big Sur

Я бы загрузил приложение DriveDX , которое специально ищет SMART-статус дисков. Приложение не бесплатное, но есть пробный период. Вы можете использовать это, чтобы проверить свой диск. Он расскажет вам о статусе SMART и подробностях о диске. Он очень прост в использовании. Просто запустите приложение, и оно начнет сканировать ваши диски. Дайте ему минуту или около того, чтобы завершить и отобразить результаты. См. изображение ниже для примера вывода. Да, мои диски выходят из строя или вышли из строя.

Я бы установил Homebrew ( brew.sh ), если у вас его еще нет.

Затем установите smartmontools, который предоставляет гораздо больше данных. Это даст гораздо более подробную информацию о состоянии вашего диска. Читайте об этом https://www.smartmontools.org

brew install smartmontools

smartctl -a disk0Вы можете diskutil -listполучить идентификатор диска.

smartctl 7.1 2019-12-30 r5022 [Darwin 17.7.0 x86_64] (local build)
Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF INFORMATION SECTION ===
Model Family:     SandForce Driven SSDs
Device Model:     OWC Mercury Extreme Pro SSD
Serial Number:    MXE12010E48B0468
LU WWN Device Id: 5 000000 000000468
Firmware Version: 361A13F0
User Capacity:    120,034,123,776 bytes [120 GB]
Sector Size:      512 bytes logical/physical
Rotation Rate:    Solid State Device
Device is:        In smartctl database [for details use: -P show]
ATA Version is:   ATA8-ACS T13/1699-D revision 6
SATA Version is:  SATA 2.6, 3.0 Gb/s
Local Time is:    Sat Jul 25 18:48:16 2020 EDT
SMART support is: Available - device has SMART capability.
SMART support is: Enabled

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

General SMART Values:
Offline data collection status:  (0x00) Offline data collection activity
                    was never started.
                    Auto Offline Data Collection: Disabled.
Self-test execution status:      (   0) The previous self-test routine completed
                    without error or no self-test has ever 
                    been run.
Total time to complete Offline 
data collection:        (    0) seconds.
Offline data collection
capabilities:            (0x7f) SMART execute Offline immediate.
                    Auto Offline data collection on/off support.
                    Abort Offline collection upon new
                    command.
                    Offline surface scan supported.
                    Self-test supported.
                    Conveyance Self-test supported.
                    Selective Self-test supported.
SMART capabilities:            (0x0003) Saves SMART data before entering
                    power-saving mode.
                    Supports SMART auto save timer.
Error logging capability:        (0x01) Error logging supported.
                    General Purpose Logging supported.
Short self-test routine 
recommended polling time:    (   1) minutes.
Extended self-test routine
recommended polling time:    (   5) minutes.
Conveyance self-test routine
recommended polling time:    (   2) minutes.
SCT capabilities:          (0x003d) SCT Status supported.
                    SCT Error Recovery Control supported.
                    SCT Feature Control supported.
                    SCT Data Table supported.

SMART Attributes Data Structure revision number: 10
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE
  1 Raw_Read_Error_Rate     0x000f   116   110   050    Pre-fail  Always       -       0/145147714
  5 Retired_Block_Count     0x0033   100   100   003    Pre-fail  Always       -       0
  9 Power_On_Hours_and_Msec 0x0032   100   100   000    Old_age   Always       -       39376h+03m+21.330s
 12 Power_Cycle_Count       0x0032   054   054   000    Old_age   Always       -       47865
171 Program_Fail_Count      0x0032   000   000   000    Old_age   Always       -       0
172 Erase_Fail_Count        0x0032   000   000   000    Old_age   Always       -       0
174 Unexpect_Power_Loss_Ct  0x0030   000   000   000    Old_age   Offline      -       6340
177 Wear_Range_Delta        0x0000   000   000   000    Old_age   Offline      -       2
181 Program_Fail_Count      0x0032   000   000   000    Old_age   Always       -       0
182 Erase_Fail_Count        0x0032   000   000   000    Old_age   Always       -       0
187 Reported_Uncorrect      0x0032   100   100   000    Old_age   Always       -       0
194 Temperature_Celsius     0x0022   030   030   000    Old_age   Always       -       30 (Min/Max 30/30)
195 ECC_Uncorr_Error_Count  0x001c   116   110   000    Old_age   Offline      -       0/145147714
196 Reallocated_Event_Count 0x0033   100   100   000    Pre-fail  Always       -       0
231 SSD_Life_Left           0x0013   099   099   010    Pre-fail  Always       -       0
233 SandForce_Internal      0x0000   000   000   000    Old_age   Offline      -       18752
234 SandForce_Internal      0x0032   000   000   000    Old_age   Always       -       20032
241 Lifetime_Writes_GiB     0x0032   000   000   000    Old_age   Always       -       20032
242 Lifetime_Reads_GiB      0x0032   000   000   000    Old_age   Always       -       35008

SMART Error Log not supported

SMART Self-test Log not supported

SMART Selective self-test log data structure revision number 1
 SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
    1        0        0  Not_testing
    2        0        0  Not_testing
    3        0        0  Not_testing
    4        0        0  Not_testing
    5        0        0  Not_testing
Selective self-test flags (0x0):
  After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.